Effect of Acidity, Basicity and ZrO2 Phases of Cu-Ni/ZrO2 Catalysts on the Direct Synthesis of Diethyl Carbonate from CO2 and Ethanol

Cu-Ni/ZrO2 catalysts with different Cu:Ni molar ratios were synthesized and tested in the direct synthesis of diethyl carbonate from carbon dioxide and ethanol. The effect of Cu:Ni molar ratio on the acidity and basicity of the catalysts was investigated using NH3 and CO2-TPD, respectively. Experime...

Full description

Autores:
Arbeláez Pérez, Oscar Felipe
Orrego A.
Bustamante F.
Villa A.L.
Tipo de recurso:
Article of journal
Fecha de publicación:
2023
Institución:
Universidad Cooperativa de Colombia
Repositorio:
Repositorio UCC
Idioma:
OAI Identifier:
oai:repository.ucc.edu.co:20.500.12494/49568
Acceso en línea:
https://doi.org/10.1007/s10562-016-1699-4
https://www.scopus.com/inward/record.uri?eid=2-s2.0-84960460550&doi=10.1007%2fs10562-016-1699-4&partnerID=40&md5=d54cb93e44a108409e666d717e6717d6
https://hdl.handle.net/20.500.12494/49568
Palabra clave:
BIMETALLIC CATALYSTS
CARBON DIOXIDE
CARBONATION
CATALYST ACTIVITY
CATALYST SELECTIVITY
CATALYSTS
CRYSTALLINE PROPERTIES
DIETHYL CARBONATES
DIRECT SYNTHESIS
EQUILIBRIUM CONVERSION
ETHANOL
HIGH SELECTIVITY
MOLAR RATIO
NICKEL
RAMAN STUDIES
ZIRCONIA
ZIRCONIUM ALLOYS
Rights
openAccess
License
http://purl.org/coar/access_right/c_abf2
Description
Summary:Cu-Ni/ZrO2 catalysts with different Cu:Ni molar ratios were synthesized and tested in the direct synthesis of diethyl carbonate from carbon dioxide and ethanol. The effect of Cu:Ni molar ratio on the acidity and basicity of the catalysts was investigated using NH3 and CO2-TPD, respectively. Experimental results revealed that Cu:Ni-3:1/ZrO2 and Cu:Ni-2:1/ZrO2 samples exhibited the largest acidity and basicity, as well as the highest yield to diethyl carbonate. In particular, these catalysts displayed very-high selectivity (i.e., larger than 95 %) and activity (i.e., equilibrium conversions are attained). Additionally, XRD and Raman studies showed that structural and crystalline properties of ZrO2 were modified with Cu:Ni ratios of 3:1 and 2:1 (Cu:Ni-1:1/ZrO2, Cu:Ni-1:2/ZrO2) which was related to the improved catalytic activity in comparison to Cu:Ni-1:1/ZrO2, Cu:Ni-1:2/ZrO2, Cu:Ni-1:3/ZrO2 and ZrO2. © 2016 Springer Science+Business Media.