Numerical modeling of fiber specklegram sensors by using finite element method (FEM)
Although experimental advances in the implementation and characterization of fiber speckle sensor have been reported, a suitable model to interpret the speckle-pattern variation under perturbation is desirable but very challenging to be developed due to the various factors influencing the speckle pa...
- Autores:
-
Aristizábal Tique, Víctor Hugo
Vélez Hoyos, Francisco Javier
Rueda, Edgar
Gómez, Nelson
Gómez, Jorge
- Tipo de recurso:
- Article of journal
- Fecha de publicación:
- 2016
- Institución:
- Universidad Cooperativa de Colombia
- Repositorio:
- Repositorio UCC
- Idioma:
- OAI Identifier:
- oai:repository.ucc.edu.co:20.500.12494/1165
- Acceso en línea:
- https://hdl.handle.net/20.500.12494/1165
- Palabra clave:
- Fiber optics sensors
Speckle interferometry
Metrology
Optical sensing and sensors
Computational electromagnetic methods
Noise in imaging systems
- Rights
- openAccess
- License
- Licencia CC
| Summary: | Although experimental advances in the implementation and characterization of fiber speckle sensor have been reported, a suitable model to interpret the speckle-pattern variation under perturbation is desirable but very challenging to be developed due to the various factors influencing the speckle pattern. In this work, a new methodology based on the finite element method (FEM) for modeling and optimizing fiber specklegram sensors (FSSs) is proposed. The numerical method allows computational visualization and quantification, in near field, of changes of a step multi-mode fiber (SMMF) specklegram, due to the application of a uniformly distributed force line (UDFL). In turn, the local modifications of the fiber speckle produce changes in the optical power captured by a step single-mode fiber (SSMF) located just at the output end of the SMMF, causing a filtering effect that explains the operation of the FSSs. For each external force, the stress distribution and the propagations modes supported by the SMMF are calculated numerically by means of FEM. Then, those modes are vectorially superposed to reconstruct each perturbed fiber specklegram. Finally, the performance of the sensing mechanism is evaluated for different radius of the filtering SSMF and force-gauges, what evidences design criteria for these kinds of measuring systems. Results are in agreement with those theoretical and experimental ones previously reported. |
|---|