Life cycle assessment to identify environmental improvements in an aerobic waste water treatment plant

Currently, reduce the environmental impacts generated by industries is vital; that is the reason why many companies are changing their processes to biotechnological processes which seem to be more sustainable alternatives. The Life Cycle Analysis (LCA) is an internationally accepted tool that allows...

Full description

Autores:
Tatiana F.
Paula P.
Vivian B.
Rigoberto P.
Ortiz Aguilar, Jannet
Acevedo Pabon, Paola Andrea
Tipo de recurso:
Article of journal
Fecha de publicación:
2016
Institución:
Universidad Cooperativa de Colombia
Repositorio:
Repositorio UCC
Idioma:
OAI Identifier:
oai:repository.ucc.edu.co:20.500.12494/42393
Acceso en línea:
https://doi.org/10.33132/01248146.945
https://hdl.handle.net/20.500.12494/42393
Palabra clave:
Climate change
Environmental management
Eutrophication
Life cycle
Nutrients
Ozone layer
Settling tanks
Tanks (containers)
Waste treatment
Wastewater treatment
Water treatment
Water treatment plants
Activated sludge reactors
Biotechnological process
Environmental assessment
Environmental improvements
Environmental performance
Life Cycle Assessment (LCA)
Secondary sedimentation tanks
Wastewater treatment plants
Environmental impact
Rights
closedAccess
License
http://purl.org/coar/access_right/c_14cb
Description
Summary:Currently, reduce the environmental impacts generated by industries is vital; that is the reason why many companies are changing their processes to biotechnological processes which seem to be more sustainable alternatives. The Life Cycle Analysis (LCA) is an internationally accepted tool that allows environmental assessment of products and processes. In addition, LCA has been used to identify environmental improvement opportunities in different production systems and, that is the reason why it has been selected to be used on this research in order to diagnose the environmental performance of a Waste Water Treatment Plant (WWTP) of a cattle benefit plant. The system studied was a WWTP located in Cúcuta (Colombia), which treats 118.477 kg/day of water from cattle benefit plant. The stages of the WWTP are: screening, grit removal, primary sedimentation tank, homogenizer, grease traps, activated sludge reactor, secondary sedimentation tank, slow down flow filter and drying bed. In this paper the process diagrams and the mass and energy balances were constructed with information provided directly by the cattle benefit plant. The impact analysis was carried out using the software SIMAPRO 7.0 and the following impact categories were evaluated: climate change, eutrophication, photochemical oxidation, depletion of the ozone layer, acidification and biotic exhaustion. It was found that the environmental impacts of the WWTP of the cattle benefit plant are generated mainly due to the high electricity consumption in screening, homogenizer, and slurry reactor. Eutrophication was also observed due to the enrichment caused by the increase of the amounts of nutrients, which affected decomposition of excess of organic matter in the water so it could not be a complete mineralization of the nutrients it possesses. All the calculations were carried out using the Ecoinvent data bases. Favourable indicators were observed comparing the environmental profiles of the biological WWTP under study with the environmental indicators of a physicochemical WWTP of cattle benefit plant located in Bucaramanga (Colombia). The potential environmental impacts were lower in all the impact categories evaluated. © 2016, AIDIC Servizi S.r.l.